400W Wind Generator with CE (MINI 3)

Model NO.: MINI-5 Rotating Shaft: Horizontal Rated Outpower: 400W Rotor Diameter: 1.16m Cut-in Wind Speed: 2.5 M/S Wind Turbine Controller: MPPT Charge Controller System Weight: 6.8 Kg Trademark: SUNNING Origin: China Number of Blade: Multiple-Blade Stress Way of Blade: Resistance Max Outpower: 450W Start-up Wind Speed: 2.0 M/S Voltage: 24V DC Kilowatt Hours Per Month: 32 Kwh/Mo at 3.2 M/S Certificate: CE RoHS ISO Specification: 770x 410x 200 mm 400W Wind Generator with CE (MINI 3)

TAIYUAN -- The first China-made Wind Turbine Generator has been installed in a wind farm in Inner Mongolia autonomous region to capture high altitude wind energy, company officials said Tuesday.
Cao Keshun, said that the generator, which weighs 805 tonnes, can be used both on land and sea for Wind Power Generation. Its annual output is enough to supply electricity for 10, 000 households per year.
The Chinese government strongly supports development of the wind power industry. The country's wind power installed capacity is expected to top 75 million kilowatts with electricity output reaching 140 billion kilowatt-hours by the end of 2013, said Wang Jun, head of the New Energy Bureau of the National Energy Administration, last month.
Cao said that the company has decided to tap further into wind power equipment production, and recently built a plant in Ulan Qab City in Inner Mongolia, which was designed with an annual production capacity of 500 wind power generators.

400W Wind Generator with CE (MINI 3) characteristics:
1. Low start-up wind speed
Low wind speed series small Wind Turbines generate more than 30% effective power than the same rotor diameter Wind Turbine annually.

2. High-efficient generator system
Three-phase permanent magnet synchronous Small Wind Generator, more than 10% of the efficiency of ultra-GB, starting resistance, only be 1/3 of the GB limit, motor insulation rating class h insulation.

3. MPPT power management system
Built-in a new intelligent controller, monitoring the wind turbines operation in real-time MPPT(maximum power point tracking) charge.

4. Noise reduction innovative technology
Start and product electricity at the 1.5m/s, noise only at dB at 13m/s/.

5. Perfect wind wheel system
The wind turbine generator wheel are made of a low temperature resistance, aging high strength compound material, can cope with a variety of complex wind conditions, charge wind energy into electrical energy efficiently and sustainably.

6. Unique design of the rudder
Small wind turbine generator rudders are ale to respond to the wind speed and wind direction flexibly, enhancing the efficiency of power generation.


Wind turbine siting
Small changes in wind speed and wind direction can have a dramatic effect on power production. In general, the higher the tower, the greater the wind speed and ultimately power production. Therefore, the siting of your wind turbine shouldbe carefully considered. Each installation is different and is often a compromise among tower height, distance from the battery bank, local zoning requirements and obstacles such as buildings and trees.
Specific requirements about installation and sitting of wind turbine are as follows:
1 the minimum recommended tower height is 8m on open ground or 5m above nearby obstructions (fig. 1), there are no obstacles within 100 meters as far as possible;
2 if install two wind turbines on one area, the distance between them is 8-10 times of rotor diameter. Try to locate the wind turbine in the "cleanest" turbulent free air as possible. Turbulence will reduce the efficiency of the wind turbine and may accelerate wear on rotating components.
3 less natural disaster places are preferred.
Safety must be the primary concern when selecting the mounting location. Even if installing the wind turbine in a less than ideal location, don't attempt to mount the turbine while blades are spinning.

Application range
At present, Mini Series Wind Turbine has widely applied in:
1 wind solar street lighting system: City street lights, road lights, landscape lighting;
2 highway monitoring power system;
3 telecommunication;
4 offshore oil platform;
5 isolated island desalination;
6 Wind Solar Hybrid System;
7 wind power system for ship;
8 wind power system for home;
9 wind power systemfor farm.
10 wind solar hybrid system

Contact us if you need more details on Wind Generator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Wind Turbine Generator、Small Wind Turbine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Mini Series Wind Turbine > Others Mini Series Wind Turbine