Wind Solar Hybrid Power Controller for off Grid Power Supply System

Model NO.: SN-WS06K-24V Rated Power of Wind Turbine: 300W Maximum Rated Power of Wind Turbine: 350W Protection Voltage of Over-Discharging O: 21V Output Protection Power: Single Circuit 220W (Resistive Load) Measurement: 195mm*135mm*70mm Specification: CE ROHS HS Code: 85023100 Rated Voltage of Chargeable Battery: 24V Range of Input Current: 0-30A Trigger Voltage of Intelligent Shut-Down: 29V Restoring Voltage of Over-Discharging of: 24.6V Rated Output Current: 10A Trademark: Sunning Origin: China Wind solar hybrid power controller for off grid power supply system 


Wind Solar Hybrid Controller is the important component in wind Solar System. We would according to the system requriement and equip the suitable controller, and match the off grid wind solar system. The controller is connect to the wind turbine , Solar Panel , battery ,Inverter and appliance, so the quality is very inportant.
We would make and example of the wind tubine input 300W ,solar panel input 300w, the controller is the following 


Compare with the others controller, this controller have many advantages

1.Current limiting.  For the contrller, when the current generate from the wind and solar is over, the current limiting function will control it and make sure the system works smoothly
2.Voltage limiting. This function is similar to the current limiting, with the system generation voltage is over, the limiting function is make sure the system smoothly performance.
3.Unloading protecting. When the battery is full ,and the wind and sunshine is very good , the system will also generate power, so the unloading function is necessary for the system to protect the battery bank .

Also, for the most important function of the controller is the remote control system. With the system and install at the computer, you could find the wind turbine and solar panel generation data, and detect the system performance. When the storm is coming, you could control the system too, you could make the wind turbine braking before the storm, you do not come the installation site to check and test it, it is more convenience for you .(The remote control system is for  optional)



The off grid power supply controller Introduction
The wind/solar hybrid controller is control device which can control wind turbine and solar panel at the same time and     transform wind and solar energy into electricity then store to the battery bank.   Wind/solar hybrid controller is the most important part in off-grid system, whose performance has much effect on life expectancy and operational stability of the whole system,especially the battery expectancy.Or life span of battery will be shortened by overcharge or overdischarge.

Performance Features
Superior military-grade components to ensure the product stability.
·Perfect protection function, thus the system has higher reliability.
·Check and set all operation parameters as requirement from LCD display.
·Voltage limiting and current-limiting charge mode ensures battery in the best charging status.
·PWM stepless unload mode, which burn the excess power into dump load, making the battery charging in best status.

Certifications
·Utility model patent of anti-strong-wind, stepless unload wind power controller
·Utility model patent for integration of rectification and unload in wind power main circuit board.
·European CE certification.
 

Rated Battery Voltage	12V	24V	48V
Rated Wind Turbine Power	300/400W	600W	600W
Wind Turbine Maximum Input Power	500W	1000W	1000W
PV Power	150W	300W	300W
Unload Voltage	14V	28V	56V
Unload Current	25A	25A	25A
Battery Over-discharge Voltage Shutoff	11V	22V	42V
Battery Over-discharge Voltage Recovery	12V	24V	48V
Output Protection Voltage	16V	32V	64V
PV Voltage Of Light-Control On	1.0V	2V	4V
PV Voltage Of Light-Control Off	1.5V	3V	6V
Line 1 Rated Output Current	10A
Line 2 Rated Output Current	10A
Line 1 Output Mode(Factory Default)	3 Modes selection(Light-control on and Light-control off)
Line 2 Output Mode(Factory Default)	3 Modes selection(Light-control on and time-control 5 hours)
Control Mode	PWM
Display Mode	LCD
Quiescent Current	≤20 mA
Working Temperature & Humidity	Ordinary:-20~+55ºC/35~85%RH(Without Condensation) Industrial:-30~+55ºC/35~85%RH(Without Condensation)
Communication Function(Optional)	RS232,RS485,RJ45,GPRS
Temperature Compensation Function	-4mV/ºC/2V ,-35ºC--+80ºC,Precision:±1ºC
By-Pass Function (Optional)	Automatic Switch
Product Size(Wide×Deep×High)	142×150×80mm		205×150×80mm
Product Weight(kG)	1.9kg		2.16kg
Low-voltage charge fucntion :
Wind Turbine Starting Charge Voltage	2V	4V		8V
Input Admittance	1-10/15S	1-10/30S		1-10/60S
Line 1 Output Mode(Factory Default)	7 Modes selection(Light-control on and Light-control off)
Line 2 Output Mode(Factory Default)	7 Modes selection(Light-control on and time-control 5 hours)
Product Size(Wide×Deep×High)	220×150×80mm
Product Weight(kG)	2.8kg		3 kg
In order to serve our customers better.Our company can adjust parameters configuration according to customer's requirement.

This  wind Solar Controller is suitable for different appliances, when the place need the wind solar powe supply system , it need the wind solar controller to match the system. 
1.wind solar hybrid street  light system
2.wind solar hybrid power system for  wooden house
3.Wind Solar Hybrid System for the barn, for horses or special animals etc.


Sunning is the professional wind turbine manufacture, we would equip the controller also, it will match the wind turbine better.

If you need more detail of the controller, please kindly contact me anytime. 
Rachel
86-13632101027
 

 

Contact us if you need more details on Controller. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Wind Solar Contrller、Solar Controller. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Wind Solar Hybrid Controller