Wind Turbine Horizontal 400W 12V, Wind Solar Monitoring System

Model NO.: MINI 5 400w Rotating Shaft: Horizontal Rated Outpower: 300W Rotor Diameter: 1.21m Cut-in Wind Speed: 2.0(M/S) Wind Turbine Controller: MPPT Charge Controller System Weight: 6.8 Kg Trademark: MINI Origin: China Number of Blade: Multiple-Blade Stress Way of Blade: Resistance Max Outpower: 350W Start-up Wind Speed: 1.5 ( M/S) Voltage: 12, 24 Vdc Kilowatt Hours Per Month: 32 Kwh/Mo at 3.2 M/S Certificate: CE RoHS ISO Specification: 300w HS Code: 85023100 300W Wind Turbine vertical

MINI Small Wind Generator Characteristics:

1. Low start-up wind speed

Low wind speed series small Wind Turbines generate more than 30% effective power than the same rotor diameterwind turbine vertical annually.

2. High-efficient Generator System

Three-phase permanent magnet synchronous small Wind Generator, more than 10% of the efficiency of ultra-GB, starting resistance, only be 1/3 of the GB limit, motor insulation rating class H insulation.

3. MPPT Power Management System

Built-in a new intelligent controller, monitoring the wind turbines operation in real-time MPPT(Maximum Power Point Tracking) charge.

4. Noise Reduction Innovative Technology

Start and product electricity at the 1.5m/s, noise only at dB at 13m/s/.

5. Perfect Wind Wheel System

The wind turbine vertical generator wheel are made of a low temperature resistance, aging high strength compound material, can cope with a variety of complex wind conditions, charge wind energy into electrical energy efficiently and sustainably...

6. Unique Design Of The Rudder

Small wind turbine vertical Generator rudders are ale to respond to the wind speed and wind direction flexibly, enhancing the efficiency of power generation.

Wind Turbine Siting

Small changes in wind speed and wind direction can have a dramatic effect on power production. In general, the higher the tower, the greater the wind speed and ultimately power production. Therefore, the siting of your wind turbine shouldbe carefully considered. Each installation is different and is often a compromise among tower height, distance from the battery bank, local zoning requirements and obstacles such as buildings and trees.

Specific requirements about installation and sitting of wind turbine are as follows:

1 The minimum recommended tower height is 8m on open ground or 5m above nearby obstructions (Fig. 1), there are no obstacles within 100 meters as far as possible;

2 If install two wind turbines on one area, the distance between them is 8-10 times of rotor diameter. Try to locate the wind turbine in the "cleanest" turbulent free air as possible. Turbulence will reduce the efficiency of the wind turbine and may accelerate wear on rotating components.

3 Less natural disaster places are preferred.

Safety must be the primary concern when selecting the mounting location. Even if installing the wind turbine in a less than ideal location, don't attempt to mount the turbine while blades are spinning.

Application Range

At present, Mini Series Wind Turbine has widely applied in:

1 Wind Solar Street Lighting System: City street lights, road lights, landscape lighting;
2 Highway Monitoring Power System;
3 Telecommunication;
4 Offshore Oil Platform;
5 Isolated Island Desalination;
6 Wind Solar Hybrid System;
7 Wind Power system for Ship;
8 Wind Power System for Home;
9 Wind Power systemfor Farm.
10 Wind Solar Hybrid System

Small Wind Turbine Generator Selections
Technical Specifications
1 Selection of MINI Series Wind Turbine
MINI series wind turbine is applicable to various-climate regions. Please fully consider the surrounding environment resources to bring the best performance while selection of MINI wind turbine.
1.1 Wind Speed: Low wind speed wind turbine could effectively utilize wind energy from low wind speed region, it's recommended to use low wind speed model in no hurricane areas with annual wind speed of less than 3.5m/s.
1.2 Environmental Temperature: It's recommended to use low-temperature type at regions where minimum temperature is less than -10º C

Product keywords:
Wind turbine, wind generator, wind turbine generator, small wind turbine, small wind generator, windmill generator, mini wind turbine, wind energy, wind power, wind power home system, wind energy home system, wind solar hybrid power, wind solar Hybrid Street Light, Wind Turbine

Technical Specifications

	Rated Capacity	300 watts at 28 mph (12.5 m/s)
	Max Capacity	350watts
	Rotor Diameter	1.21m
	Weight	6.8 kg
	Shipping Dimensions	770x 410x 200 mm (8.8kg)
	Mount	1.5 in schedule 40 1.9 in (48 mm) OD pipe
	Start-Up Wind Speed	1.5 ( m/s)
	Cut-In Wind Speed	2.0(m. s)
	Voltage	12, 24 VDC
	Turbine Controller	Microprocessor-based smart internal regulator with Maximum Power Point Tracking
	Body	Cast aluminum
	Blades	5 PC Nylon Fiber
	Overspeed Protection	Electronic torque control
	Kilowatt Hours per Month	32KWh/mo at 3.2 m/s
	Survival Wind Speed	50 m/s
	Warranty	3 year limited warranty

 

Contact us if you need more details on Wind Turbine Horizontal. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Wind Turbine、Wind. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Mini Series Wind Turbine > Wind Solar Street Light System